FloPlast Deepflow/ Hi-Cap Downpipe Offset Bend - 92.5 Degree x 80mm Grey
In stock
Code
RBH1G
| Code | RBH1G |
|---|---|
| EAN Code | 5055149922800 |
| Angle | 92.5 Degree |
| Brand | FloPlast |
| Colour | Grey |
| Dimension | 84mm (Diameter) |
| Guarantee | 10 Years Manufacturers |
| Material | PVC-u |
| Specification | BS EN 1462 |
| Weight (kg) | 0.164500 |
| Size | 80mm |
92.5 Bends are used in a downpipe system to change the plane of the bend from vertical to horizontal or vice versa.
They are often used instead of offset bends when the soffit is particularly wide - this enables the pipe to run neatly below the soffit rather than dropping down diagonally back to the wall as it would with a normal swan neck setup.
The angle of the bend is 92.5 degrees rather than 90 degrees to encourage a slight fall, enabling rainwater to run away rather than sit in the pipe.
